Just because an exhaust tip has a brand tag doesn’t mean that it is one of the top dogs. But a brand name does confirm the credibility of that product. I have used many exhaust tips with plenty of ”shiny” features that turned out to be nothing but trash.
Moreover, it often gets difficult when you can’t physically check the product out. Even if you find all the details, it’s tough to find a perfect match.
And when you’re looking at something as exclusive and exquisite as a Dodge Charger, finding the right exhaust tip gets even harder. Over the years, I’ve worked on many different models of Dodge Chargers. That’s why I know what’s what.
So, people who are looking for the best exhaust tip for Dodge Charger can trust the recommendation I make here. But you should know that the suggestions are generic. And if you have any specific requirements, you should read through the details carefully before putting your finger on an exhaust tip.
Anyways, enough throat clearing. It’s time I take you to the meat of the matter. Have a look at all the exhaust tips I’ve got listed here and see which one floats your boat.

Things to Consider Before Buying an Exhaust tip
If you are already stressed out in your quest for the perfect exhaust tip for your Dodge Charger and have no clue where to begin, take a small tour of all the enlisted products. I know it’s pretty tough to find the best match for your exhaust pipe but considering a few things, I believe you won’t end up making a wrong purchase.
As a rational buyer, I assume you should take a look at the following things:
What Type of Installation Do You Prefer?
Exhaust tip comes with two types of installation method – one is weld-on, and another is clamps-on. It is not an issue if you are indifferent between both processes. However, if you have some specific preferences, you should be careful about the installation process of the exhaust tip you are buying.
Thus, set your preference first since weld-on mounting requires professionals to install, and bolt-on is a DIY thing for some people.
- Best quality and budget-friendly: Upower 2.5 Inch Inlet 3.5 Inch Outlet Dual Exhaust Tips
- Best for price: LCGP 3″ Inlet Exhaust tip 5″ Outlet
What Is Your Inlet Size?
Do not buy an exhaust tip if you are unsure about the sizes. It is essential that the size of your tailpipe and inlet of the exhaust tip matches each other. If it doesn’t, buying the product would be nothing but a waste of your money because it won’t fit – no matter how hard you try, it won’t work.
These are some basic things you need to be careful about, but you can also check out the following factors:
- Brand value
- Durability and construction quality
- Features compared to its price
- Customer reviews – both positive and negative
- Seller rank
Here are the 7 Best Exhaust Tips for Dodge Charger
There are many different styles and sizes available, so you can find the perfect one for your car.
1. Upower 2.5 Inch Inlet 3.5 Inch Outlet Dual Exhaust Tips
Choosing one among a hundred is never an easy task, but if you are getting one from Upower, then I believe it’s not that difficult. For those who are looking for a budget-friendly exhaust tip yet the finest in quality, the Upower dual exhaust tip for Dodge Charger can enlist as their first choice.
As a car enthusiast, I keep changing the outlook of my car, so do I change these exhaust tips once a year. However, most of them have no sound effects, but I found this baby has a deeper impact on the sound. You will notice the change in sound immediately.
Moreover, it comes with high-quality anti-corrosive stainless steel that can give your vehicle a monstrous appearance. Besides, the dual coating makes the tip pretty durable.
So, let go and see what other great things are waiting for you if you are planning to get this tip soon for your Dodge Charger.
Product Specification
- Manufacturer: PartsSquare
- Brand: Upower
- Surface: Chrome and Vacuum plating (colored in blue)
- Weight: 2.88 pounds/1.30 kilos
Technical Details
- Material: T304 stainless steel: Anti-corrosive
- Installation: Weld-on
- Sizes: Inlet 2.5″, Outlet 3.5″, Length 9.5″
Features
Durability and Quality: Apart from the looks, I always reach out to durable products, and undoubtedly this is one of them. It has a body constructed with T304 stainless steel, which also includes two different coatings.
The chrome plating increases the hardness and durability of this product. In addition, it prevents corrosion and makes it easier to clean.
On the other hand, the vacuum plating improves the tip’s appearance and makes it brighter. Besides, this coating also helps resist water, friction, or any harmful chemicals.
Great Look: The design was the very first thing that drew my attention toward this nice glowy blue exhaust tip. I am personally not the one who compromises a thing if it comes to appearance. This product has a solid double wall surface, which means you get two layers of construction body.
It has both chrome and vacuum plating, so you don’t have to worry about the exhaust tip being rusted or corroded. Besides, the slant angle-cut tip with rolled edge 2.5″ inlet 3.5″ outlet exhaust tip for Dodge Charger looks amazing once you have an upper view after installation.
Change in Sound: If you are looking into that particular exhaust tip, which can make some noticeable sound effects in your vehicle, get this asap!
It is true that exhaust tips have less impact on the sound, but I must say this one’s quite different. In that case, you might need to delete both your muffler and resonator, which I did to my Dodge Charger, and now it actually roars.
Installation: It comes with a bolt-on installation process, which is nothing but a simple cut and weld to a DIY guy. However, if you have never done this before, then I would recommend professional installation. Just make sure the inlet size of this exhaust tip and tailpipe matches each other.
Besides, it is better to be safe since the process requires cutting the muffler and welding the tip, which might not be a beginner’s cup of tea.
2. LCGP 3″ Inlet Exhaust Tip 5″ Outlet
If you have a very tight budget yet want some changes in your truck or car, then LCGP Inlet Exhaust Tip can serve you well. It would make an excellent choice for beginners because you don’t have to spend much to give your car an appealing look.
The matte black surface has the ultimate power to change the outlook of your vehicle. So if you are on a quest for black exhaust tips for your Dodge Charger, then why not take a good look at this one.
So, without further ado, let me show other exciting features of this tool.
Product Specification
- Manufacturer: LCGP
- Brand: LCGP
- Surface: Black powder coat
- Weight: 2.48 pounds/1.12 kilos
Technical Details
- Material: High-quality stainless steel: Anti-corrosive
- Installation: Bolt-on/ Clamp-on
- Product Dimension: 12.2 x 5.2 x 5.2 inches
- Sizes: Inlet 3″, Outlet 5″, Length 12″
Features
Build Quality: I think manufacturers left no stone unturned to make this product robust and sturdy. The build quality is amazing considering its price and other aspects, and I must say this is the best black exhaust tip for Dodge Chargers.
It comes with high-quality stainless steel, which has anti-corrosive material as well as very few chances of getting rusty.
One unique feature – the small hole on the bottom of the tip prevents it from accumulating water, so I was personally so happy with this since, during the rainy season, I never had to bother about this issue.
Design: The exhaust tip has a pretty smooth surface with a black powder coating. Also, the edges are rolled in the shape of a 30-degree angular cut. So, I think the tip will settle down nicely with your vehicle.
However, one important note on this exhaust tip is that my exhaust tip turned light grey from matte black due to heavy usage. It might be only in my case and could be different for others, but you should keep this in mind as you won’t want this anyway.
Heat Resistance: The black powder-coated surface fights against high temperatures. So, this tip is also heat resistant.
Easy Installation: Welding is just an extra hassle to me, and if you think the same as me, my recommendation would be this bolt-on exhaust tip. Simply tighten those clamps, and you are good to go.
But if you think it is not safe enough, then you obviously can keep welding as an additional option.
Read Also: How to Clean Black Exhaust Tips: A Complete Guide [2023]
3. Carven 5″ Exhaust Tips Dodge Charger
Carven exhaust tips are one of the top-notch brands and come with a vast range of products. These are different in design, quality, and performance. Even though this is a little more costly than other exhaust tips yet customers often seem very satisfied using this product.
If you are looking for a quality mirror polish 2019 Dodge Charger with 5-inch exhaust tips, then I think this product has quite interesting features for you. So, let me give a short tour of this amazing tool to all the interested people.
Product Specification
- Manufacturer: Carven Exhaust
- Brand: Carven Exhaust
- Surface: Mirror polish finish
- Weight: 6.14 pounds/2.78 kilos
- Laser-etched: Carven Exhaust logo
Technical Details
- Material: T304 Stainless Steel
- Installation: Clamp-on application
- Product Dimension: 12 x 5 x 5 inches
- Outlet: 5-inch round
Features
Durability and Build Quality: Talking about the durability of this exhaust tip, I would say you should not doubt T304 stainless steel. It is the highest material grade, also known as authentic stainless steel. So, this exhaust tip is highly durable and comes with a never rusting feature.
Besides, the packing has one pair of exhaust tips, which means you are getting tips for both of the tailpipes of your Dodge Charger.
Next, you will find a nice laser-etched Carven exhaust logo on top of the mirror polish finish, which I think is outstanding compared to other products.
Quick Installation: The best part is – no welding, no hassle. It comes with clamps on the application, so you do not have to spend further to get this done. You might need a swivel and a socket set, which you can buy from any nearby store.
However, I suggest showing up in a garage with your vehicle if you are very new to this because I have encountered many customers who messed up with their exhaust tip and tailpipe. They usually struggle to remove their old welded tips, so they eventually cannot complete the installation.
Top-notch Appearance: The mirror polish finish indeed gives a wonderful outlook to your vehicle, and to me, this is the best option to fill the void of your bumper with this bad boy.
Moreover, the round-cut exhaust tip nicely fits with the two-piece lower valance, which is another reason why I think this is the best tip for the 2016 Dodge Charger pursuit valance. So, if your vehicle equips two valances, what are you waiting for? Grab this beauty asap!
4. IFOKA Truck Diesel Exhaust Tips 4 Inch Inlet to 6″ Outlet
IFOKA Truck Diesel Exhaust Tip is another budget-friendly yet best in quality product I have used till now. It has a wonderful chrome-plated surface, which is never rusty and resistant to high temperatures. Besides, it perfectly fits my Dodge Charger’s 4-inch tailpipe and gives my rear an amazing appearance.
So, if your preference is not matte black rather, you are seeking one shiny chrome exhaust tip for your Dodge Charger, you should look at this one.
I guess the above features have already made you excited, and if so, let’s dig in and see what more this exhaust tip has to offer you.
Product Specification
- Manufacturer: IFOKA
- Brand: IFOKA
- Surface: Chrome plated surface treatment
- Weight: 4.14 pounds/1.88 kilos
- Drainage hole
- Design: Rolled edge and angle cut
- Rust Proof exhaust tip
- Easy to install
- Budget-friendly
Technical Details
- Material: Stainless Steel
- Installation: Bolt-on application
- Dimension: Inlet 4″, Outlet 6″, Length 15″
Features
Performance: It uses high-quality stainless steel, which is resistant to rust. Also, the surface comes with chrome plating, so I believe this exhaust tip will last years after years and be less likely to fall off or get scratched.
While using this, I have experienced that this tip does not get hot when my vehicle is on the run, and later, I found that it is resistant to high temperature – isn’t it great? I guess indeed because I didn’t have to worry about accidentally touching the tip and burning myself.
Design and Dimension: Design is the first thing I see when it’s about exhaust tips. The reason is very simple – as it has an impact on my vehicle’s outlook. Talking about this elegant chrome exhaust tip, I must say the chrome surface is indeed a great show. Besides, the edges are nicely angle cut, which looks amazing once it’s all set up with your car. So, I believe IFOKA did a great job in design.
The exhaust tip has a 4-inch inlet, 6-inch outlet, and 15-inch length. Here, everything sets apart – you should be very careful about the diameter of your tailpipe. It only fits a 4-inch sized tailpipe so if you’re looking for a 4-inch Dodge Charger exhaust tip, then make this baby yours. Besides being quite long, this exhaust tip protects the original tailpipe from sun and rain.
Unique Drainage Hole: One common question I always hear from my customers is whether the tip will accumulate water or not? It is actually a matter of concern because if the exhaust tip fails to drain water, eventually, it will decrease the longevity of the tip. Besides, the chances of corrosion in the tip and tailpipe will go up.
However, the great news is you are getting a drainage hole on the bottom of the exhaust tip, so what do you think now? It will not be easy to accumulate water – hence, it won’t get rusty that easily.
No welding, No hassle: Bolt-on installation is the easiest ever, and this exhaust tip is one of them. All you need is to clean the exhaust tip and the tailpipe gently. It would be best if you get rid of oil and dust. Next, put the exhaust tip on and tighten all the clamps and screws. Bingo! You are done.
5. Borla 20248 Exhaust Tip
Borla is one of the renowned manufacturers in the USA, which brings many unique and high-performing exhaust tips. It has a variety of products, and Borla exhaust tips for Dodge Chargers are indeed their masterpieces.
In this regard, BORLA 20248 exhaust tip comes with high-end T304 stainless steel and a million miles warranty. In addition, the angle cut rolled edge adds a resonator that prevents unwanted droning noise. So, if you are looking for a tool that can change the appearance and offers to control the sound, I think this might be an appropriate choice.
Let me give you an overview of this exhaust tip and see what some special features are waiting for you.
Product Specification
- Manufacturer: Borla
- Brand: Borla
- Surface: Mirror polished
- Weight: 3.04 pounds/1.38 kilos
- Design: Round rolled edge and angle cut
- Sound control: Adds resonator
- Craved with Borla logo
- Country: USA
Technical Details
- Material: High-quality T304 Stainless Steel
- Installation: Weld-on method
- Dimension: Inlet 2.25″, Outlet 4″, Length 13″
- Model number: 20248
Features
Durability: The exhaust tip is built with industrial-grade T304 stainless steel, which has an anti-corrosive feature and is endurable to dust and scratch. Besides, the unique styling is done with precision welding that ensures its million-mile warranty and an appealing outlook to your vehicle.
Adds Resonator: If you are tired of hearing the annoying popping of your car, nothing can be better than an exhaust tip added with a resonator. I think this is a great feature because you don’t have to spend additional money installing a resonator since you are getting one with this tip. Besides, if you live in the USA, you will know how important it is to keep the sound in control since it’s illegal here.
Weld-On Installation: Borla exhaust tip comes with weld-on mounting, and if you are a DIY guy, this work is nothing but a fun time with your car for you. But, many of us out there are not quite experts in welding. So, it will require professional installation for them.
6. Flowmaster 15391 Ss Exhaust Tip
Flowmaster is a well-known automobile company that comes with several exhaust accessories. It offers quality products yet at a reasonable price. So, if you are looking for a budget-friendly exhaust tip for your Dodge Charger and expecting to make it as appealing as possible, then Flowmaster dual exhaust tips for Dodge Charger can be on your list.
The exhaust tip has an inner diameter of 2.5 inches and an outer diameter of 4 inches, so if your tailpipe comes in these sizes, then I think it’s very good news. Besides, if you are specifically looking for 2012 Dodge Charger exhaust tips, undoubtedly, this one will be a good fit for your baby.
Let’s move on and see what other features you can avail of if you make this tip yours soon.
Product Specification
- Manufacturer: Flowmaster
- Brand: Flowmaster
- Surface: Mirror polished- painted exterior
- Double-wall dual exhaust tip
- Weight: 1 pound/0.454 kilo
- Design: Angle cut slant tip
- Embossed with Flowmaster logo
- Origin: China
Technical Details
- Material: Stainless steel body
- Installation: Weld-on method
- Dimension: Inlet 2.5″, Outlet 4″, Length 10″
- Model number: 15391
- Product dimension: 1 x 1 x 1 inch
Features
Construction & Performance: Build quality is essential, especially when rusting makes you worried. But this dual exhaust tip has stainless steel and double-wall construction, which is less likely to get rusted, so it won’t be a problem even if you are a heavy user.
Besides, the surface is durable, mirror-polished, and has a nicely painted exterior, which not only emphasizes design but also makes the exhaust tip last for years. However, the surface might turn yellowish due to heavy usage. But apart from that, I did not find any drawbacks yet.
Design: The appearance is also pretty unique, and I would say the angle-cut design has some effect indeed. I have noticed the alteration over the sound immediately after installing the tip, and I think you will notice how deep it is. Besides, this dual exhaust tip is definitely two in one deal for you.
Budget-friendly: This Flowmaster exhaust tip for Dodge Charger is a great automobile accessory, and you can make it yours at a very lower price. So for those willing to buy a branded tip for their vehicle and looking for something reasonable, but the quality is a must, this one can be your best choice.
Installation: This exhaust tip features weld-on installation, so it might require a professional to complete it. You might think it’s an extra cost and hassle, but to me, it is very convenient. Previously, I could not prevent thieves from stealing my clamps-on exhaust tips because they are effortless to put on and off, so I prefer welding more than clamps nowadays.
7. Corsa Performance 14346BLK Exhaust Tip
The Corsa Performance exhaust tip features dual-walled black stainless steel and comes with a unique design. It maintains visual appeal as well as offers pretty alluring services to all who are in quest of the best exhaust tips for Dodge Charger RT. However, this product is quite expensive so
So, if you are one of them and interested to know all the other exciting features of this tip, then what are you waiting for? Let’s dive in and check them all now.
Product Specification
- Manufacturer: Corsa Performance
- Brand: Corsa
- Surface: Dual-walled exhaust tip with vacuum coat
- Technology: Physical vapor deposition (PVD) technology
- Weight: 7.09 pound/3.216 kilos
- Design: Angle cut
- Finished off with the Corsa logo
- Clamps include the tip
- Fitting: Only Corsa muffler
Technical Details
- Material: Black stainless-steel body
- Dimension: Inlet 3″, Outlet 4.5″
- Installation: Clamps-on
- Product dimension: 10.5 x 23.2 x 6.9 inches
Features
Durability: The exhaust tip is manufactured with black stainless steel that says no to rust and corrosion. Besides, the wall comes with a dual surface, which protects against heat distortion, so no worries even if you accidentally get in touch with the tip.
Moreover, it uses Physical Vapor Deposition technology to produce a thin layer of vacuum on the tip that ensures its durability.
Outlook and Design: Talking about the appearance of this exhaust tip, I will say it has a very adorable design. The glossy black powdered surface looks fantastic when you put this on to your Dodge Charger. Besides, it also gives a vacuum-coated surface using PVD technology, so it vaporizes the solid metals and turns them into a thin layer.
Therefore, Corsa didn’t compromise a thing regarding the design, and if you are also looking for something visually appealing, then I suggest having a look at this one.
Clamps-on Installation: If you are tired of welding and the additional cost of professional services, I have great news for you all. Each of these pro-series tip packages includes a clamp so you can install it very quickly and easily.
The exhaust tip is quite easy to install as no welding is required and a bolt-on installation can be completed in minutes. The tip comes with a standard size that fits most car makes and models. All you need is to get rid of your old tips and bolt this tip on, and you are done.
Great Service: Even though the Corsa Performance exhaust tip is expensive, it offers pretty good service to the customers. I found the detailing pretty precise and perfect, especially the high-definition laser engraved surface.
The Bottom Line
Exhaust tips are an essential part of a vehicle, and to me, the sporty flair and the aesthetic appeal are very important. Plus, I also believe it helps the exhaust system work better and changes the sound a little bit.
Anyways, I have shared my experience and tried to give you a small but thorough list to help you out with your exhaust tip. But the most in-depth breakdown won’t help you unless you know what you want. That’s why you have to figure things out first.
If you want an all-around exhaust tip, the Upower 2.5 Inch Inlet 3.5 Inch Outlet Dual Exhaust Tips should do the trick. And if that doesn’t work, I suggest you look into the LCGP 3″ Inlet Exhaust Tip 5″ Outlet.
Both of these have what it takes to claim the title of the best exhaust tip for Dodge Charger. The other tips listed here are also pretty good. But I prefer the first two.
So, show some love to your Dodge Charger by getting a new exhaust tip. The tips, suggestions, and comparisons made here should be more than enough to get you on your way. Cheers!