Invidia Q300 Vs R400: Which Is Better and Why?

Invidia q300 and r400; both are cat-back systems for cars. A cat-back system is a beneficial tool to boost engine performance such as increases horsepower, saving fuel and battery, better sound, and many more.

That’s why car owners are much interested to install a cat-back system. However, all cat-back systems are not the same. More often than not people end up installing a poor cats that don’t meet their expectations.

Since you are here to compare Invidia q300 vs r400, which implies you are smart enough not to get a random shit!

So, in this post, I’ll compare both of the cat systems and show all the differences, features, review them individually and finally come up with my fact-based choice! 

Feel good? Come along with me!

Technical Comparison of Invidia Q300 and R400

Invidia Q300 STI Features and Review

So, you are the type of driver who doesn’t want much attention while driving? Well, then invidia q300 is made for you!

Compare to invidia r400, this exhaust comes with this system is quieter which is much appreciated by specific user group. If you are one of them, you will also like this Catback.

So, what other feature the system has to offer?

Yea, I know you’re anxious about performance. Well, q300 got your back though! Its high-flow engine performance ensures optimum engine performance. With a robust design, q300 comes with 

The mufflers on the Q300 produce a sporty, deep and rich tone without introducing any unwanted sound characteristics which are fantastic.

All that mean it doesn’t have any flaws? Heck no. Therefore, you should consider both pros and cons.

---

Invidia R400 Features and Review

If you’re tired of the noisy and messy exhaust noise of your car, then this is the solution for you.

Invidia r400 is a cat-back exhaust system for cars that are designed to reduce the volume of exhaust noise. The company says that their system does this by redirecting the exhaust sound into the cabin of the vehicle, where it can’t be heard.

Invidia r400 consists of three parts – the first part is a metal duct that extends from the engine bay to the rear of the vehicle, where it’s attached to the exhaust pipe. 

The second part is a rubber insert that sits in the metal duct, and this reduces the noise produced by the exhaust. The third part is the muffler itself, which is made of ceramic material and is fitted inside the metal duct.

Can you install it yourself? Yes, It’s very easy to install and doesn’t require any special tools. All you need is a hammer and a screwdriver to put it together.

Once you have the system installed, you won’t hear any noise at all, as the muffler absorbs the sound produced by the exhaust.

The company says that their system is tested and certified by the German authorities, and it’s been shown to reduce noise by about 80%. 

It’s also backed up by a 5-year warranty!

The system is available in two different sizes – the smaller one is for a car with a 2.4L engine, and the bigger one is for a car with a 3.0L engine.

You can use this catback  system for both gasoline and diesel engines, and it’s recommended for vehicles with a power rating of up to 250 horsepower.

---

Invidia Q300 Vs R400: Who Wins?

So far you learned about the features, reviews, pros and cons of each Catback system. You should have therefore got a clear idea about which is better.

However, I’ll show you a comparative analysis here and pick the obvious if not the better one.

People consider different factors when considering something. Someone may be interested in its performance, while others may be interested in its aesthetics and sound.

However, I think performance and sound should be the top thing to priotize.

So, based on the features offered by the catback system (which I’ve also mentioned above) I think r400 is winner here.

And, when it comes to sound, I’d share my biased opinion as the interest varies from person to person. I personally like nice, aggressive and loud exhaust. That’s why I’d definitely pick Invidia r400.

However, if you love something that produces smooth, quiet and buttery sound, the invidia q300 would be the best bet to go.

That’s why in terms of sound I’d say this is a Tie.

There is couple of other things before picking the best one. But, of them which is most considerable is aesthetics.

So, let’s start with aesthetics. Invidia R400 Catback system offers Titanium exhaust tips which show a premium look outside. While q300 doesn’t come with it. So, in regards to aesthetics, the clear winner is Invidia r400.

So, based on these 3 factors I’d say the clear winner is Invidia r400.

In case, you are still confused about choosing which Catback system is good for you, follow the next section where I’ve discussed in detail how to choose a Catback system for your car.

How to Choose a Catback System for Your Car?

A Catback system is an essential component of the exhaust system of a vehicle. It’s required to connect the exhaust of the vehicle to the muffler. It is also used to direct the exhaust gases away from the vehicle.

A Catback system consists of four basic components,

1. Muffler
2. Exhaust pipe
3. Pipe that directs the exhaust gasses away from the vehicle
4. Connection of the pipe with the muffler

So, it’s important to know each part of a Catback system to make a conscious decision.

Mufflers

Basically, a muffler absorbs sound waves. They are generally designed to reduce the sound level of exhaust gasses.

Mufflers absorb high-frequency noises created by engines. As the sound waves are being absorbed by the muffler, the sound is being passed through.

The muffler is made of metal and is placed on the rear of the vehicle. It is a cone-shaped device, which is placed in front of the catalytic converter. The muffler is attached to the exhaust pipe.

Mufflers are connected to exhaust pipes via pipes. In between the exhaust pipe and the muffler is a metal pipe.

A catalytic converter is connected to a muffler by an exhaust pipe. Through the stainless steel pipe, exhaust gas passes.

Catalytic Converter

The catalytic converter is a cylinder-shaped device, which is placed in the engine compartment. The catalytic converter is usually placed on the back of the engine.

A vehicle’s exhaust system begins with this part. As a result of its metal construction, it converts toxic gases into non-toxic ones.

The catalytic converter is placed at the rear of the vehicle and is used to filter the exhaust gases and convert toxic gases into non-toxic gasses.

In a vehicle, toxic gases are absorbed by the catalytic converter, which is a cylindrical device.

The catalytic converter is placed at the rear of the vehicle and absorbs the toxic gases emitted by the vehicle.

Okay, now you know all of the components of a Catback system. So, you got the importance of each part yourself. This will help you make a decision emphasising and considering various factors of each part.

FAQs

Is the Invidia R400 Loud?

The system is designed to provide the best sound possible. The system has large woofers that are able to reproduce low frequencies. The system also has a subwoofer that produces deep bass sounds.

What Are the Features of the Invidia R400 Cat-Back Loud System?

The system has a volume control knob that allows you to adjust the level of the sound. The speaker outputs are located on the front, rear, and side of the car. 

The front speakers are on the front bumper and the side speakers are on the sides of the car. The subwoofer is located under the hood.

Final Verdict

Invidia offers some of the best quality Catback systems on the market. Their performance, sound quality, and construction all made them unbeatable in the market. Even their lifetime warranty feature is attractive.

In the matter of the topic of this post, I compared two of the model called Invidia q300 and r400 from the model. I showed both the weakness and strengths of the two. Both are actually good. However, upon careful research, I found out Invidia r400 is better than its counterpart.

Anyway, if this comparison helped you in making decision, consider reading this comparison.

---

Read Also:

• Up-Pipe Vs Down-Pipe (How Do They Differ?)